Heat Shrink Low Voltage Terminations
1.1kV Heat Shrink Termination. Low voltage cable crutch is sealed by an adhesive lined heat-shrinkable breakout installed over cores and end of over sheath. The heat-shrinkable tubing seals between the cable lug and end of core insulation. All materials are resistant to UV-light and weathering
- Heat Shrink technology
- Quick and easy Installation
- Solutions for all types of cable and constructions
- Hot melt adhesive coated cable breakout and sealing sleeves
- Fungi resistant
Specifications
| Parameter |
|---|
| High reliability and low skilled features with unlimited shelf life for heat shrink materials |
| Suitable for wide range of crimp and mechanical connectors |
| Suitable for single / multi core, armoured / unarmoured cables |
| Suitable for indoor and outdoor applications |
| Type tested as per National and International standards |
Technical Information
| Sr. No. | Particulars | 1.1 KV |
|---|---|---|
| 1. | Rated Voltage of Cable accessories | 1.1 kV |
| 2. | Applicable Standards | IS: 13573- Part 1, 2011 / EN50393 |
| 3. | Heating Cycle Test in Air | Total cycle = 63 nos. |
| a. Each cycle heating duration | 5 hours (maintain 2 hrs min as steady state) | |
| b. Temperature | PVC – 75°C, XLPE – 95°C. | |
| c. Cooling Duration | 3 hours | |
| 4. | Heating Cycle Test in Water | Total cycle = 63 nos. |
| a. Each cycle heating duration | 5 hours (maintain 2 hrs min as steady state) | |
| b. Temperature | PVC – 75°C, XLPE – 95°C. | |
| c. Cooling Duration | 3 hours | |
| 5. | Insulation Resistance Test (Water) | 50 MΩ (Min) |
| Insulation Resistance Test (Air) | 50 MΩ (Min) | |
| 6. | Impact Test for Straight Joints (armoured cables) | No damage |
| 7. | A.C. Voltage Withstand (Water) | 4 KV for 1 minute |
| 8. | A.C. Voltage Withstand (Air) | 4 KV for 1 minute |
| 9. | Thermal Short Circuit | As per cable cross section and material of conductor |
| 10. | Tubing Material | Heat Shrinkable Type |
| 11. | Di-electric strength of insulating material | 10 kV/mm min |
